Helpful Tips When Using the Iridium AxcessPoint With Your Satellite Phone

Iridium Axcesspoint

The Iridium AxcessPoint works for the Iridium 9555 satellite phone and the Iridium 9575 Extreme.  AxcessPoint is a lightweight, portable device that connects via USB cable to the Iridium handset and creates a Wi-Fi hotspot.  It establishes a narrowband internet connection primarily suited for email messaging and browsing mobile websites.  Our customers have found that the AxcessPoint is a simplel ‘plug & play’ unit however when setting it up keep these points in mind.

A Connection call
Once you’ve plugged in the unit, there is not much that you need to do in order to start sending emails. Just detect the Wi-Fi hotspot and you are connected.  The connection speed is 2.4kbps so is it not recommended for internet browsing.  Iridium has an email compression software that comes with the AxcessPoint called Mail and Web that you will need to download from www.iridium.com/axcesspoint. Or you can use our free service of GMPCS Speedmail.  Also, there is an iPhone App that allows you to send and receive compressed emails once you are set up. 

It is important to note:  When the AxcessPoint is connected to the Iridium satellite phone and it is turned on, a connection (phone call) is established and it is kept until AxcessPoint is turned off or unplugged from the Iridium Phone.

Also do not use high bandwidth applications made for terrestrial networks such as video or music.


Secure your Wi-Fi
When you create the Wi-Fi hotspot with AxcessPoint you should make sure it is secure.  Iridium AxcessPoint can be password protected.  The default setting is not to require a password for access to the Wi-Fi hotspot. Follow the steps below to set the password:

• Turn ON Iridium AxcessPoint.
• Connect to Iridium AxcessPoint to your Wi-Fi laptop via the Wi-Fi connection.
• Open a web browser and connect to Iridium AxcessPoint’s IP address: http://192.168.0.1 This will bring you to the Administrative Page.
• Enter your Iridium AxcessPoint’s password that is the last six digits of the MAC address (can be found on the back of the device).
• On the Basic screen, under Wireless Security Mode, select WEP or WPA-PSK for security mode.
• In the Preshared key field, you can change the password. The default password is “12345678”
• Save settings.
• Iridium AxcessPoint will reboot automatically.

You have now set the password for your Iridium AxcessPoint. The new password will be required to access your iridium Wi-Fi hotspot.

For more information, please contact GMPCS at +1-954-973-3100